Name：BS-8005 Semiautomatic aerosol 3 in 1 filling machine
Model：BS-8005
Description：
Brief introduction
Features:
BS-8005 semi-automatic aerosol filling machine, in terms of design,
the content filler, capper and air inflator are assembled in a
table. It makes the whole aerosol filling courses can be finished
by 1 machine and 1 worker. This machine can work alone, and it can
be discretionarily a workgroup with another machine, users can
freely arrange this upon requests. It occupies a very small
space,and easy to operate. Only one worker can complete the whole
process of production (labor intensity of workers with other
domestic manufacturers of semi-automatic sealing machine operations
rather). It is the first choice for aerosol manufacturers.
Price advantage:
The cost performance of BS-8005 is higher than any semiautomatic or
full automatic aerosol filling machines in the market. Comparing
with the others’ semiautomatic filling machine, it’s very
labor-saving, virtually it can save USD4500-7500 workers' wages per
year. In comparison with others' automatic filling machines, 3 sets
BS-8005 aerosols filling machine can be match up with the same
efficiency of 1 set automatic machine, and require the same
quantity workers, but the price is only half of the full automatic
one. Then it’s obvious to know the RIGHT choice.
BS-8005 doesn’t only fill aerosol products, but also on do
high-speed re-filling for RECYCLE cans and secondary cans, does not
need valve replacement.
Quality advantages:
Besides, all of the pneumatic valve used national standard
pneumatic valves, and all of them adopts open type design, so it’s
easy to buy and easy to replace. Liquids and with the local agent
contact the projectile seals have F4 import of materials used. All
other Seals are standard items. And the use of seals and small,
sealed all the moving pieces of metal surface roughness in the
Ra0.2m ~ Ra0.4m, and hard chrome thickness more than 0.02mm, the
seals wear is not easy, very low failure rate. This filling machine
is suitable for aerosol manufacturers and aerosol filling factories
whose production ability is around 100,000cans/month, especially
suitable for aerosol manufacturers who want to re-fill a large
number of recycled cans.
Parameters:
Max. filling capacity(ml) | 450 | Suitable cans | Height(mm) | 150-350 |
Diameter(mm) | 35-65 |
Max. charge(ml) | 450 | Working pressure(MPa) | 0.5-1.0 |
Filling accuracy | ±1% | Max. air consumption (Mpa) | 1 |
Filling speed(cans/h) | 800－1200 |
